Updated November 19, 2026. Data as of November 17, 2026: EPA rule details from EPA's Lead and Copper Rule Improvements pages, and station counts from our directory, recounted before publishing.
Short Answer
Lead in drinking water mostly comes from old pipes, not from the water source. The biggest source, when it's there, is a lead service line, the pipe that connects a home to the water main. The EPA says there is no safe level of lead in drinking water.
You can't see, smell or taste lead, so the way to know is to check your pipes and ask your water utility to test. Under EPA's newest lead rule, most utilities must replace lead service lines within 10 years, starting November 1, 2027. If you'd rather fill jugs while you sort it out, our city list shows refill stations near you, and most of them list reverse osmosis (RO) water.
How lead gets into drinking water
Lead usually gets into water on its way to your faucet. The EPA says the primary source of lead in drinking water is pipes. When a home has a lead service line, that line is the greatest source of lead exposure in its drinking water, according to EPA's questions and answers on the rule.
The federal government banned new lead pipes in 1986. Even so, up to 9 million homes and businesses are still connected to water mains through older lead pipes, according to EPA's fact sheet. If your home was built before then, your service line is worth checking.
Why the EPA treats any lead as a concern
The EPA's position is short: there is no safe level of lead in drinking water. Its questions and answers say lead exposure can cause serious health effects in all age groups, and especially in pregnant people, infants and young children. For children, it lists lower IQ and attention span and new or worse learning and behavior problems. For adults, it lists higher risks of heart disease, high blood pressure, and kidney or nervous system problems.
If you're worried about your family's exposure, talk with your doctor. They can tell you whether a blood test makes sense.
How to check for lead in your water
These steps come from EPA's guidance on its newest lead rule. Start with your pipes, then your water.
- Look up your service line. Water systems must keep an inventory of service line materials, and it must be public. Search your utility's website for its "service line inventory" or "lead service line map" and look up your address.
- Read any letter about your line. Utilities must notify you if your line is lead, galvanized steel that may carry lead, or of unknown material. An "unknown" line still needs checking.
- Ask your utility, or a licensed plumber. If the inventory doesn't answer it, the EPA says to contact your utility or a licensed plumber to find out what your service line is made of.
- Ask your utility to test your water. The EPA's guidance is to contact your water utility to have your water tested and to learn about lead levels in your area. A TDS meter won't answer this question. Our guide to what a TDS meter can and can't tell you explains why.
- If you have a lead line, join the replacement program. Contact your utility about its replacement plan. Also watch for nearby construction or pipe work, which the EPA says can shake loose more lead from a lead line.
One thing that doesn't help: boiling. The EPA says boiling water does not remove lead. Our comparison of pitcher filters and reverse osmosis shows which popular pitchers list lead on their current certification sheets.
What EPA's new lead rule changes
The EPA announced the final Lead and Copper Rule Improvements (LCRI) on October 8, 2024. It builds on the original Lead and Copper Rule from 1991. Here's what it requires of water systems, and what that means at home.
| What the rule requires | What it means for you |
|---|---|
| Replace lead service lines, and certain galvanized lines, under the utility's control | For the first time, most utilities must do this within 10 years. About 99% of systems have 10 years or less; a few can get more time |
| Keep a public service line inventory and identify every unknown line | You can look up your line, and you'll be told if it's lead, galvanized or unknown |
| Lower the lead action level from 15 to 10 micrograms per liter | More utilities will have to act sooner, by adjusting treatment to reduce lead and telling the public |
| Sample the first and fifth liter at homes with lead lines, and use the higher result | Testing is designed to catch water that sat in a lead line |
| Hand out filters after repeated high results | Systems that go over the action level more than once must make filters certified to reduce lead available to all customers |
| Clearer annual water quality reports | Reports must explain lead's health effects, cover lead testing in schools and child care, and say where to find the replacement plan |
The "action level" isn't a safety line. It's the level at which a utility has to take action. The EPA still says no level of lead is safe.
Key dates
- October 16, 2024: utilities had to have an initial service line inventory, start telling people about lead, galvanized or unknown lines, and give 24-hour public notice when lead tops 15 micrograms per liter, according to EPA's compliance dates fact sheet.
- November 1, 2027: the LCRI's compliance date. Utilities must submit an updated baseline inventory and a replacement plan, the 10 microgram action level and new sampling start, and mandatory replacement programs begin.
- Within 10 years of that date: most utilities must finish replacing lead and certain galvanized lines under their control.
The EPA's fact sheet says the federal infrastructure law set aside $15 billion over five years for lead service line replacement. Ask your utility whether its program covers the part of the line on your property.
Where refill stations fit
Some people fill jugs at a refill station while they find out about their pipes. More than 21,000 stations in our directory list RO water, across all 50 states.
We don't test any machine, and we can't tell you whether a given station's water has lead in it. A refill machine is only as good as its treatment and upkeep, and EPA's lead rule is written for water utilities. Before you fill, run through our 30-second refill machine checklist: a clean fill area, an intact machine, and an operator name or service sticker. It also covers what recent research found about lead in some kiosks. Our post on what reverse osmosis removes goes deeper on RO itself.
FAQ
Is there a safe level of lead in drinking water?
No. The EPA says there is no safe level of lead in drinking water. Its lead action level is the point where a utility has to act, not a safe limit.
How does lead get into drinking water?
Mostly from pipes. Lead service lines, the pipes that connect homes to water mains, are the greatest source when they're present. New lead pipes were banned in 1986, but up to 9 million homes and businesses are still connected through older ones, according to the EPA.
How do I know if I have a lead service line?
Look up your address in your water utility's service line inventory, which must be public. If it isn't listed or shows as unknown, the EPA says to ask your utility or a licensed plumber.
Does boiling water remove lead?
No. The EPA says boiling water does not remove lead.
What is the new lead action level?
Under EPA's Lead and Copper Rule Improvements, the lead action level drops from 15 to 10 micrograms per liter. It takes effect November 1, 2027. When a utility goes over it, the utility has to take steps to reduce lead and inform the public.
When will lead pipes be replaced?
Under the rule, most utilities must replace lead service lines, and certain galvanized lines, under their control within 10 years of the November 1, 2027 compliance date. The EPA says about 99% of systems have 10 years or less. Ask your utility for its replacement plan.
Can a water filter reduce lead?
A filter can reduce lead if it's certified to remove lead and you use it the right way. The EPA says to follow the directions, replace the cartridge on time, and not run hot water through it.
Do water refill stations have lead in their water?
We can't say for any specific machine, because we don't test machines. A station's water depends on its treatment and how well it's kept up. Before you fill, look for a clean fill area, an intact machine, and an operator name or service sticker.
General Information
This article is general information, not medical or plumbing advice. We didn't test any water, pipes or machines. Rule details come from the EPA's Lead and Copper Rule Improvements materials and can change, so check with your water utility for what applies to your address. If you're worried about lead exposure, talk with your doctor.