What's in Your Water

Pitcher Filter vs. Reverse Osmosis: What Brita, PUR and ZeroWater Are Certified to Remove

Is a Brita the same as reverse osmosis? No. What Brita, PUR and ZeroWater pitchers are certified to remove, what RO adds, and what each costs per gallon.

By the PureWaterFinder TeamPublished 9 min read
On This Page

Short Answer

No, a pitcher filter isn't reverse osmosis (RO). A pitcher runs water through a carbon cartridge that's certified for a specific list of contaminants, like chlorine taste and, on some models, lead. RO pushes water through a membrane and takes out far more, including most dissolved solids, bacteria and viruses.

Our pick: reverse osmosis for the water you drink every day, from a refill station or a home system. A certified pitcher is a fine choice if what you want is better taste and the specific contaminants on its performance sheet, but it doesn't do what RO does. Which one fits you depends on what you need taken out, how much you drink and whether you'd rather fill a jug or swap cartridges.

How a pitcher filter and RO differ

A pitcher filter is a cartridge you pour water through. Most use activated carbon, sometimes with an ion exchange resin. Water passes through by gravity, and the cartridge grabs certain chemicals and metals as it goes.

RO works differently. Pressure pushes water through a semi-permeable membrane, and most systems add one or more filters before and after it, according to NSF, the group that writes the main standards for home water filters. That membrane is why RO can remove so much more. According to the CDC, RO systems remove parasites, bacteria and viruses, plus lead, copper, chromium, chloride and sodium, and they can reduce arsenic, fluoride, nitrate and more.

The trade-off: RO also takes out most minerals, and a home system sends water down the drain. The EPA says a typical under-sink RO system makes five gallons or more of reject water for every gallon you drink, while WaterSense-labeled models must keep it to 2.3 gallons or less. A pitcher wastes nothing and leaves most minerals in.

What NSF 42, 53, 401 and 58 mean

The numbers on the box tell you what a filter was tested to do. NSF says they reflect the order the standards were written in, not a ranking.

Water filter standards in plain words
StandardWhat it coversWhere you'll see it
NSF/ANSI 42Taste and odor, like chlorine, and some particlesAll four pitchers below
NSF/ANSI 53Contaminants with a health effect, like lead or mercuryAll four pitchers below
NSF/ANSI 401Emerging contaminants, like some medicines, BPA and microplasticsThree of the four pitchers below
NSF/ANSI 58Reverse osmosis systemsHome RO systems, not pitchers

Two things trip people up. First, a filter certified to a standard isn't certified for everything in it. A filter can be certified to NSF/ANSI 53 for some contaminants and not others, so the standard number alone doesn't tell you which ones. NSF itself says certification "does not mean that a filter, purifier or treatment system will reduce all possible contaminants." The only way to know is to read the filter's performance data sheet, which lists each substance and the percent reduced in testing.

Second, pitchers aren't certified to remove bacteria or viruses. Each sheet we read says so in its own words. Brita's say its filters are "not intended to purify water," and PUR's says it "does not filter microbes."

What Brita, PUR and ZeroWater are certified to remove

Here's what each maker's current performance data sheet lists for four common pitcher filters. These are lab results under standard conditions, and each sheet notes that real-world results may vary. Some claims apply only to certain pitcher models, so check the sheet for your exact pitcher and filter.

What four pitcher filters list on their current performance data sheets
FilterTested toChlorine (taste and odor)Other contaminants listedRated filter life
Brita StandardNSF/ANSI 42, 5395%Zinc, copper, cadmium, mercury40 gallons, about 2 months
Brita EliteNSF/ANSI 42, 53, 40197.4%Lead (99.5% to 99.6%), mercury, cadmium, asbestos, benzene, microplastics, BPA, some medicines120 gallons, about 6 months
PUR PLUSNSF/ANSI 42, 53, 40197.5%Lead (99.2% to 99.9%), mercury, cadmium, copper, benzene, total PFAS, microplastics, BPA, some medicines40 gallons, about 2 months
Culligan with ZeroWaterNSF/ANSI 42, 53, 40199.4%Lead (98.8% to 98.9%), total PFAS, fluoride, nitrate, chromium-6, copper, mercury, cadmium, BPA, some medicines20 gallons

A few things stand out:

  • Lead. Brita Elite, PUR PLUS and Culligan with ZeroWater list lead on their current sheets. If lead is your concern, pick a filter whose current sheet lists it, or use RO.
  • PFAS, fluoride and nitrate. PUR PLUS and Culligan with ZeroWater list total PFAS on their current sheets, and Culligan with ZeroWater also lists fluoride and nitrate. Check the current sheet for the model you own, since sheets get updated. For how RO handles these, see does RO remove PFAS, fluoride and microplastics?
  • Microplastics. Brita Elite and PUR PLUS list microplastics under NSF/ANSI 401.
  • ZeroWater has two filters. Culligan sells the newer "Culligan with ZeroWater Technology" filter and an older legacy ZeroWater filter, each with its own sheet and filter life. Culligan says the newer filter is not compatible with older ZeroWater pitchers and dispensers, so check which one fits your pitcher.

What none of them claim: removing bacteria, viruses or parasites. Each sheet says so, as quoted above. And all four are tested to pitcher standards, not to NSF/ANSI 58, the RO standard.

Is ZeroWater reverse osmosis?

No. ZeroWater is a pour-through cartridge, not a membrane, so it isn't RO. It does come with a TDS meter, which Culligan's instructions use to check the filter. A low reading tells you a lot is being taken out of the water. It doesn't tell you the water is free of lead, PFAS or bacteria. Here's what a TDS meter can and can't tell you.

What RO adds

RO systems are tested under NSF/ANSI 58, which includes a total dissolved solids test. The EPA's WaterSense program for RO systems also checks TDS reduction and membrane life. So RO goes after the dissolved stuff a carbon pitcher mostly leaves alone: salts, nitrate, and, depending on the system, arsenic and fluoride. Per the CDC, it also removes bacteria, viruses and parasites.

That's why RO is our pick for everyday drinking water. It covers the long list, not only the items on one cartridge's sheet.

The flip side is minerals. RO removes most of the calcium and magnesium too, which is why RO water tastes flat to some people. We went through the minerals question in is reverse osmosis water bad for you?

What each costs per gallon

We divided each filter's list price by the gallons its sheet rates it for. Filter prices are list prices we saw on November 12, 2026. Refill prices are listed prices in our directory on the same day. For listed prices by water type and chain, see water refill prices.

Cost per gallon, pitcher filters vs. RO
OptionPrice we sawCost per gallon
Brita Elite filter$19.99 at Target, 120 gallonsAbout $0.17
Brita Standard filter$7.99 at Target, 40 gallonsAbout $0.20
PUR PLUS filter$14.99 at Target, 40 gallonsAbout $0.37
Culligan with ZeroWater filter$36.99 for 2 from Culligan, 20 gallons eachAbout $0.92
RO at a refill stationMost listings in our directory$0.50
Budget under-sink RO systemParts over 5 years at a gallon a dayAbout $0.22 to $0.33

Those pitcher numbers assume you get every rated gallon out of each filter. Change it early, or run hard water through it, and the real cost goes up. The pitcher itself isn't counted either. The home RO range comes from our breakdown of whether reverse osmosis is worth it, which also covers installation and filter changes.

So price alone doesn't settle it. A Brita filter can cost less per gallon than a refill. The difference is what you're paying for: a short, specific list on a pitcher, or RO's much longer one.

Which one should you pick?

Pick RO if you want the broadest removal, including dissolved solids, nitrate, or bacteria and viruses, or if your water report shows something your pitcher's sheet doesn't list. You don't have to install anything. More than 21,000 stations in our directory list reverse osmosis, and most list $0.50 a gallon, about $2.50 for a 5-gallon jug. Here's where to refill a 5-gallon jug near you, and a 30-second checklist to run at the machine before you fill.

Pick a home RO system if your household drinks a gallon a day or more and you're fine installing one and keeping up with filters.

A pitcher makes sense if you mainly want better taste or a specific contaminant its sheet lists, like lead, and you're happy to change cartridges on schedule. Pitchers are also handy for the fridge between refill trips.

Whatever you choose, match it to what you actually need taken out. The CDC's advice applies to pitchers too: check the label for what it's certified to remove. If you're curious how RO compares with other ways to treat water, start with how reverse osmosis works.

FAQ

Is Brita filtered water the same as RO water?

No. A Brita pitcher uses a carbon cartridge certified for a specific list of contaminants. RO pushes water through a membrane and also removes most dissolved solids, plus bacteria and viruses. RO water reads much lower on a TDS meter.

Is ZeroWater reverse osmosis?

No. ZeroWater is a pour-through cartridge, not a membrane. Its current Culligan sheet lists total PFAS, fluoride and nitrate, and it says not to use the filter with water that's microbiologically unsafe or of unknown quality without disinfection.

Does a Brita filter remove fluoride?

Check the current performance sheet for your exact Brita filter, since that's where any fluoride claim would be listed. Of the pitchers we checked, Culligan with ZeroWater lists fluoride on its current sheet. The CDC says RO can reduce fluoride.

Does a pitcher filter remove PFAS?

Some do. PUR PLUS and Culligan with ZeroWater list total PFAS on their current sheets. Check the current sheet for your exact filter. RO is the other common option.

Which is better: Brita, PUR or ZeroWater?

We don't rank them. Each one lists different contaminants, filter life and price, so the right one depends on what you need taken out. Compare the current performance sheets side by side, starting with the contaminant you care about most.

What do pitcher filters not remove?

Anything not on the filter's performance sheet. None of the pitchers we checked is certified to remove bacteria, viruses or parasites. Carbon pitchers also leave many dissolved minerals in. Brita, for one, says its Elite filter keeps certain minerals and electrolytes.

Is reverse osmosis better than a carbon filter?

For drinking water, RO removes more: most dissolved solids, nitrate, bacteria and viruses, plus what a good carbon filter catches. Many RO systems include carbon filters before and after the membrane. A carbon filter alone wastes no water and costs less to start.

General Information

This article is general information, not medical advice. We didn't test any of these products. Brands are named as dated examples, not endorsements, and we don't earn anything from the links. If you have a health condition, talk with your doctor about your drinking water.

Share This Post

Step-by-step help from our guides.